Manufacturing Process of Concrete Pavers

BY SRI KRISHNA PLASTO

The Basic Machines Required for the Manufacturing Process of the Concrete Pavers are:

  • 2 Vibrating Tables.
  • 1 PAN Concrete Mixture Machine.
  • 1 Pan Type Mixture Machine (Top mix).
  • Air Compressor ( for spray coating ).
  • 300kg Electronic Weight Scale.
  • Basic Material for Handling Equipment’s.
  • PVC Rubber Paver Block Moulds or Plastic Paver Block Moulds it depends upon Buyer.

NOTE:-

  1. For the Best Result We Recommends Paver Block Moulds.
  2. Quantity of the Paver Block Moulds | Rubber Paver Moulds | Plastic Paver Block Moulds depends on your per day production requirement.
  3. For a Paver Block Plant (approximate 3000 Blocks production/per day) Land Required is Approx minimum 1500 Sqm.

RAW MATERIAL REQUIRED FOR THE MAKING OF PAVER BLOCKS

  • Aggregate (6mm to 20mm).
  • Crushed Stone Dust.
  • OPC Cement.
  • Water.
  • Concrete Admixture Chemicals.
  • Colors.
  • Coating (for surface glossy look).

For More Detail about Manufacturing Process of Concrete Pavers Please Watch the Given Video By Srikrishanaplasto.

This Video will help you a lot in Understanding the Process of How to Manufacture the Concrete Paver Blocks?

MANUFACTURING PROCESS OF CONCRETE PAVERS

Now a days, There are 2 Main Important Manufacturing Process Used for the Production of Concrete Paving Block Units.

These are given below:-

  • Wet Cast Technique
  • Hydraulically Pressed Technique

Wet Cast Technique

Wet Cast Concrete Technique is typically used for Creating Decorative and Fancy Concrete Products that require High Strength and Finishing.

Wet Cast Concrete  Techniques rely on the Plastic Paver Moulds and Rubber Paver Moulds.

Wet Concrete is added to the Plastic Paver Mould or Rubber Paver Mould,

The Concrete is then Settled at Indoor Place for Curing (Hydration Process).

After Curing for Sometime, the Paver Mould must be removed.

And After that Clean the Paver Mould and Re-use the Mould for Hundred or Thousand of Times.

Hydraulically Pressed Technique

Hydraulic Pressing Technology is Use for the Manufacture of Regular Size Concrete Products with High Strength,

Concrete Products  will be Subjected for Secondary Treatments.

The Hydraulic Pressing Technique gives us Different Benefits.

Wet Casting is a Preferred Option for Small and Local Manufacturers.

As they Use the Same Basic Machinery (Vibrating Table) and a Library of Simple and Low-cost Moulds fpr the production of a Wide Range of Products.

Whereas, Hydraulic Pressing allows the Bigger Manufacturers to Churn out Large Quantities of High-Strength Products of a Consistent Quality,

but for the Sizable Dedicated Production, Curing and Handling Facility is Required.

SRI KRISHANA PLASTO

TOP PRODUCTS ARE:-

  1. RCC GARDEN BENCH MAKING MOULD
  2. CONCRETE GARDEN BENCH MOULD
  3. INTERLOCKING PAVER MOULD
  4. RAILWAY PLATFORM MOULD
  5. COMPOUND WALL MAKING MOULD
  6. STONE LOOK RUBBER MOULD
  7. SPACERS AND COVER BLOCKS MOULD
  8. DRAIN COVER MOULD
  9. PRECAST BOUNDARY WALL MOULD
  10. PRECAST COMPOUND WALL MOULD
  11. CUBE MOULD
  12. PRECAST TREE GURARD MOULD
  13. CEMENT REMOVER CHEMICAL
  14. CONCRETE REMOVER MACHINE CHEMICAL
  15. CONCRETE TRUCK CLEANING CHEMICAL
  16. PAVER MOULD CLEANER
  17. PLASTIC PAVER MOULD CLEANER
  18. PLASTIC PAVER MOULDS CLEANER CHEMICAL
  19. PVC RUBBER MOULD CLEANING CHEMICAL
  20. READY MIX TRUCK CLEANER CHEMICAL
  21. RED COLOR IRON OXIDE PIGMENT 130S
  22. SYNTHETIC RED IRON OXIDE RIO-4130S
  23. LANXESS RO3 RED IRON OXIDE COLOR POWDER
  24. BAYFERROX 4130 RED IRON OXIDE PIGMENT
  25. 330 BAYFERROX BLACK IRON OXIDE PIGMENT
  26. BLACK IRON OXIDE PIGMENT

ALSO WATCH AND SUBSCRIBE OUR YOU-TUBE CHANNEL:- SRIKRISHNAPLASTO

We Are The Top Leading Manufacturers.

As Well As, Suppliers.

All Over India.

By All Means Of Road Transport.

ABOVE ALL, WE HAVE CLIENTS FORM DIFFERENT STATES.

LIKE:-
HaryanaPunjabKrishnapatnamVisakhapatnamGangavaram
RajasthanEnnoreChennai Kolkata Haldia
BiharParadipCochin GoaUttar Pradesh

CONTACT US:-
Sri Krishna PlastoSri Krishna OverseasSriJaiganeshsteel
BE-318 Hari Nagar
New Delhi -110064
Mobile :- +91-9716283988
Email :- [email protected]
Disclaimer:- Please Try Sample Before Mass Production and Buying. Be Satisfied With Our Product. Result May Be Different In Some Cases.